Audio Technica Desk Stand MIC. AT8668S

These Audio-technica anti-shock microphone stand effectively isolate mounted microphone from impact vibration and mechanical noise normally transmitted from the surface.
Description
These Audio-technica anti-shock microphone stand effectively isolate mounted microphone from impact vibration and mechanical noise normally transmitted from the surface. They are intended for use with microphones stood on lecterns, pulpits, conference tab

The At8668S features a press-on/press-off switch that controls the microphone, muting it by 55 dB at 1,000 Hz. The circuitry also operates a light in the switch, powered by the 24-48V phantom source, to indicate when the mic is "on". Regardless of the switch position, the actual mic operating voltage will be approximately 10-12V less than the phantom source voltage.

AT8668S Specifications
Phantom Power Requirements
24-48V DC, 3 mA typical
Output Impedance
360 ohms
Insertion Loss
1 dB (150 ohm source, 100k ohm load)
Mute Attenuation
55 dB at 1000Hz 35 dB at 100Hz 30 dB at 50Hz (150 ohm source, 100k ohm load)
Mic Attachment
XLRF - type, XLRM - type, Switch with LED
Dimensions
112mm X 142mm X 40mm (Width X Depth X Height)
Weight
1.2 kg

 

cl1.pngcl2.pngcl3.pngcl4.pngcl5.pngcl6.pngcl1.pngcl2.pngcl3.pngcl4.pngcl5.pngcl6.png